![]() ![]() If you have only connected the network camera to your router, identification should not be a problem. If such designation is missing, retrospectively see which devices are connected by Cable. If you find a device named “IP Camera” or “IP Cam” in the list, it is the connected network camera. Take a look at the names and the respective connection type of the listed devices. If this list is not directly visible, you may have to look for “Network” or “Home Network Favourite” in the menu. If you have successfully logged into the user interface of your network router, you should see a list of the connected network devices. Enter the relevant data in the login mask and log in. If you have not yet made any settings in the user interface, you can find the standard password in the instructions for use or on the back of the device. The user interface of the network router is normally password-protected. You can find the IP address of your network router on the back of the device. In order to do so, open a new browser window and enter the IP address of your router in the address line. To determine this, first open the user interface of your network router. ![]() To be able to access the user interface of the IP camera, you need the IP address of the connected camera to add IP camera to Dahua DVR. You can recognise a successfully established connection by the LEDs on the camera or the LEDs on the network router.Īs soon as all settings have been made and you have determined the IP address of the surveillance camera, you can switch to WLAN operation.Īdd IP Camera to Dahua DVR Determine the IP address of the network camera Plug one end of the LAN cable into the corresponding socket on the back of the IP camera and the other end into a free LAN socket on your network router. When setting up the network camera for the first time, you should use a LAN cable (Ethernet cable), as some network routers have problems with the initial installation via WLAN. Only then should you connect the surveillance camera to your network router. Once the power supply has been established, the IP camera will be noticeable through initial movements or an illuminated LED lamp. Connect the IP cameraīefore adding IP cameras to Dahua DVR, you have to connect the IP surveillance camera to a power source using the power plug supplied. Via the user interface in the web browser or with the Dahua IP Camera Config Tool you can add an IP camera to Dahua DVR. As soon as the IP camera is connected to your network, you have full access to all setting options. In order to be able to set up an IP camera to Dahua DVR after purchase, the camera must be connected to its own network structure.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |